What To Do If Your Water Heater Suddenly Stops Working
What To Do If Your Water Heater Suddenly Stops Working
Blog Article
How do you feel on the subject of What Would Cause My Electric Water Heater to Stop Working??
Numerous contemporary residences make use of an electric water heater for their furnace, due to its benefit as well as convenience of use. However, just like any other electrical appliances, problems may develop with its use, all of a sudden. It can be actually irritating to wake up to a cold shower instead of a hot one or having your bath with water that isn't hot enough or even too hot. Whatever the situation may be, water heater problems can be quite nerve-racking. Thankfully, we've made a listing of possible services to your water heater problems. There are a number of elements that could cause many of these problems, it could be an issue with the power supply, the electric burner, or the thermostat. Prior to doing anything, guarantee you switch off the primary power supply for safety. Whatever the trouble is, getting it dealt with need to not pose too much of an issue if you follow these steps:
Call A Professional:
If after replacing all faulty parts and resetting your temperature level, the hot water heater still isn't functioning, you might require to call a specialist plumber for an expert viewpoint. The issue with your heating unit could be that the hot and cold taps have been switched or it may be undersized for the quantity of warm water required in your house. Whatever the situation may be, a professional plumber would aid address the trouble.
Inspect Your Power Supply:
As fundamental as this may seem, it is really necessary. Without sufficient power, your water heater will certainly not work. So the first thing to do when your water all of a sudden stops working is to confirm that it isn't a power problem. Examine if the fuse is blown out or the circuit breaker stumbled. If the circuit breaker is the concern, merely turn it on and off once again. Replace any kind of damaged or worn-out fuse. Examine the home appliance with power after these changes to see if it's currently working.
Check Your Thermostat:
If your hot water heater still isn't working or the water appearing isn't hot sufficient, you may need to inspect the temperature setups on your upper thermostat. Make certain the breaker is switched off prior to doing anything. Open the accessibility panel as well as press the red switch for temperature reset over the thermostat. This must help heat up the water. Turn the breaker back on and examine if the problem has actually been dealt with.
Examine the Heating Element in the Hot Water Heater:
If it's not a power issue, after that attempt taking a look at your heating element if it is still functioning. Evaluate each of your burner to make sure the problem isn't with any one of them. If any of them is damaged, replace that component and after that check whether the warm water is back on.
Conclusion
Hot water heater problems are not constantly major. Most of them are because of small problems like a blown fuse or damaged heating element. Changing the defective components ought to suffice. Nevertheless, if you are still incapable to resolve the trouble, give a call to your closest plumber ahead to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed reading our section on No Hot Water — Water Heater Repair. Thanks so much for spending some time to read through our piece of content. Do you know another individual who is curious about the niche? Do not hesitate to promote it. We appreciate reading our article about How to Troubleshoot and Repair an Electric Water Heater.
Request Free Estimate
Report this page